Distributor of premium appliance brands Liebherr, Falcon & La Cornue

Push Button Ignition

To light a burner with push button ignition, press the igniter button, and push in and turn the associated control knob to the high position as indicated by the large flame symbol.  The igniter should spark and light the gas. Keep holding the knob pressed in to let the gas through to the burner for about ten seconds.  If when you let go of the control knob, the burner goes out, then the FSD (flame failure safety device) has not been bypassed. Turn the control knob to the OFF position and wait for one minute before you try again, this time making sure to hold in the control knob for slightly longer.

This feature or function can be found in the following models: